🌍 WoYo COMPRESSOR Since 1996 ⭐ 30+ Year Industry Experience ✓ Verified Elite Supplier
✓ Verified Elite Supplier
Menu
WoYo COMPRESSOR
Verified Elite Supplier
WoYo COMPRESSOR
China

Annual Output
12,000 units
Total Employees
120+
Business Type
Industrial Equipment & Components

Share Us Via

Low Noise Anti-Vibration Screw Compressor Airend for Rail Transit GCU11

Quantity:
SKU: 4039687523
Model: GCU11

{{ variable.name }}

{{ value.name }}

Low Noise Anti-Vibration Screw Compressor Airend for Rail Transit GCU11

Anti-vibration structure | noise at or below 75 dB(A) | MTBF up to 30,000 h | sealed housing for narrow underframes

Anti-vibration integratedMTBF up to 30,000 hUnderframe fitRail transit certification

Product Summary

This GCU11 variant is built for rail transit air supply, where the unit runs continuously under high vibration, tunnel dust and frequent start-stop and sits in a very tight underframe bay. The anti-vibration integrated structure carries the airend, separator tank, three filters and four valves in one sealed body of 378 x 350 x 415 mm and 55 kg, which fits the narrow space under a metro or EMU floor. Noise is held at or below 75 dB(A) and measured mean time between failures reaches 30,000 h in the rolling stock programme. Brake pipe pressure is supplied between 5 and 16 bar with a 0.6-1.0 m3/min delivery at 7 bar across a 4-7.5 kW drive range.

GCU11 rail transit screw compressor airend with sealed anti-vibration housing
Sealed anti-vibration housing of the GCU11 rail transit configuration.

Key Features

Anti-vibration integrated structure

The block is developed for continuous running under rail vibration, keeping air supply stable on EMU and metro bogie-mounted air systems.

MTBF up to 30,000 h

Measured reliability in the rolling stock programme reaches 30,000 h between failures, which supports long maintenance intervals for fleet operators.

Sealed housing for narrow bays

A 55 kg body of 378 x 350 x 415 mm fits underframe envelopes where a conventional airend plus receiver would not go.

Noise at or below 75 dB(A)

Low noise output reduces the acoustic treatment needed around brake and auxiliary air supply packages in passenger areas.

Anti-oil-emulsification design

A patented anti-emulsification method (CNIPA patent ZL2025 1 1888313X) combined with triple-sealing technology addresses the condensation that causes oil emulsification and leakage.

Oil carry-over below 2 ppm

Built-in coarse separation plus an oversized external fine separator protect brake control units and dryers downstream.

Technical Specifications

ModelGCU11 rail transit configuration
StructureAnti-vibration integrated 9-in-1 housing, sealed
MTBFUp to 30,000 h in rolling stock service
NoiseAt or below 75 dB(A)
Power4-7.5 kW
Speed2900-6500 rpm
Free air delivery at 7 bar0.6-1.0 m3/min
Working pressure, max / min16 / 5 bar
Max discharge temperature105 C
Oil carry-overBelow 2 ppm (design at or below 3 ppm)
Net weight55 kg
Dimensions (L x W x H)378 x 350 x 415 mm, excluding air filter assembly
Housing / rotorsHigh-grade cast iron housing, forged alloy steel rotors with UV patented profile
Bearings / shaft sealSKF heavy-duty rolling bearings, triple-sealing technology

Models and Options

Rail configurations are selected by vehicle type and by the air consumer: brake pipe, pantograph assist or air suspension. Power stays within 4-7.5 kW and speed within 2900-6500 rpm, so the delivery point can be aligned with the brake control unit demand. For 16 bar duty the external fine separator, oil filter and safety valve are specified at 20 bar rating or higher. Where an imported airend is being replaced, drop-in replacement dimensions can be quoted.

For 16 bar and higher duty, confirm that the external fine separator, oil filter and safety valve carry a rating of at least 20 bar before the unit is released to the vehicle build line.

Materials and Structure

The housing is high-grade cast iron, with an aluminium-alloy version under development. Rotors are forged alloy steel machined to the German-designed UV patented profile over more than 20 precision steps to micron-level accuracy, carried in SKF heavy-duty rolling bearings. The shaft seal applies triple-sealing technology, and the anti-oil-emulsification method is protected under CNIPA patent ZL2025 1 1888313X with PCT filing available on request. Four valves and three filter positions are integrated on the block, and the sealed housing closes the assembly against tunnel dust.

GCU11 airend rotor and bearing assembly viewed from the drive end
Rotor and bearing assembly on the drive end of the GCU11 block.

Applications

  • EMU and metro train braking and auxiliary air supply
  • Light rail and freight train brake pipe air supply
  • Pantograph assist and air suspension air supply
  • Locomotive main air source systems
  • Rail vehicle air system retrofit and localisation programmes

Customization

Rail projects are configured around the vehicle interface: mounting points, port positions, pressure setting and the connection to the brake control unit and main reservoir. Drawings are supplied for approval before series build, and the sealed housing can be adapted to the available underframe envelope. Fleet programmes can be supported with a documented maintenance scope limited to filter replacement where the application allows.

Case Study

A metro operator has approximately 120 units in service for four years on metro train brake and air suspension supply. There has been zero oil-emulsification or leakage failure since commissioning, and maintenance has been limited to filter replacement. The sealed integrated housing fits the narrow underframe of the fleet.

A rolling stock OEM has taken approximately 400 units per year for five years for EMU and metro braking and auxiliary air supply. Localised replacement of imported airends reduced total cost by over 30 percent, air supply stays stable under high vibration, and MTBF reaches 30,000 h. A locomotive manufacturer has also used the series for five years as main air source on locomotive and rail vehicle wind source systems, supported by rail transit product certification.

FAQ

How is vibration handled on a rail vehicle?

The unit uses an anti-vibration integrated structure developed in rolling stock programmes, and air supply has remained stable under high vibration in the EMU and metro applications.

What maintenance interval can be expected?

MTBF reaches 30,000 h in rolling stock service. In the metro fleet of approximately 120 units, maintenance over four years has been limited to filter replacement.

Will the unit fit a narrow underframe bay?

The sealed integrated housing measures 378 x 350 x 415 mm excluding the air filter assembly at 55 kg, and it was selected for a metro fleet specifically because it fits the narrow underframe.

How is oil emulsification prevented?

The anti-oil-emulsification method is protected under CNIPA patent ZL2025 1 1888313X, combined with triple-sealing technology on the shaft and two-stage oil separation.

Which rail approvals are held?

The company holds rail transit product certification for air supply units used on locomotives, EMU, metro and freight trains, plus CE certification from TUV Rheinland, ISO 9001:2015 from SGS and IATF 16949.

What noise level is quoted?

Noise is at or below 75 dB(A), which is the figure used for rail transit packages in this series.

Inquiry Information

Send the vehicle type, underframe envelope and brake system pressure so the rail configuration can be confirmed.

Email: service@woyo.cn | Tel: +86 510 8599 6655 | WhatsApp: +86 189 1237 9878

Wuxi Woyo Superdo Compressor Co., Ltd. (WOLXAIR), No.5 Changkang Road, Mashan, Binhu District, Wuxi, Jiangsu, China

Image Filename and Alt Suggestions

gcu11-rail-transit-sealed-housing.png | Alt: GCU11 rail transit screw compressor airend with sealed anti-vibration housing
gcu11-rail-rotor-bearing-drive-end.png | Alt: GCU11 airend rotor and bearing assembly viewed from the drive end
gcu11-rail-underframe-mounting.png | Alt: GCU11 airend mounting points for metro underframe installation