{{ variable.name }}
This plateau configuration of the GCU13 adds an altitude oxygen compensation intake port and a -40 °C to +50 °C design envelope, holding stable pressure and delivery at altitudes up to 5,000 m while keeping oil carry-over at 3 ppm or lower.
The GCU13 plateau configuration is the same 9-in-1 integrated airend, with an intake engineered for thin air. An altitude oxygen compensation intake port maintains delivery as ambient pressure falls, and the unit is built to a -40 °C to +50 °C envelope for the day-night swings of high-altitude routes.
The air it produces feeds onboard oxygen and nitrogen generators, so cleanliness is part of the specification: oil carry-over is held at 3 ppm or lower and the stream must be dry after the dryer and precision filter stage. Ratings remain 0.9-1.6 m³/min at 7 bar, 5-12.5 bar working pressure, 44 kg and 375 x 353 x 470 mm excluding the air filter.
An oxygen compensation intake port sustains pressure and delivery as ambient pressure drops, validated in service up to 5,000 m.
Covers plateau day-night temperature swings without disturbing the air supply to the oxygen or nitrogen chain.
Protects generator membranes, air dryers and precision filters downstream of the airend.
Airend, separator tank, three filter positions and four valves arrive as one sealed assembly for underframe or cabinet installation.
375 x 353 x 470 mm and 44 kg allow drop-in replacement in envelopes originally sized for imported airends.
Certificate CE-WSD-GCU-2023-001 from TUV Rheinland covers integrated airends and vehicle-mounted compressors of 2.2-45 kW.
| Model | GCU13 plateau configuration |
|---|---|
| Free air delivery at 7 bar | 0.9-1.6 m³/min |
| Working pressure, max / min | 12.5 / 5 bar |
| Drive power and speed | 7-15 kW, 2900-6500 rpm |
| Oil carry-over | 3 ppm or lower |
| Design temperature envelope | -40 °C to +50 °C |
| Valued service altitude | Up to 5,000 m |
| Max discharge temperature | 105 °C |
| Noise | 75 dB(A) or lower |
| Net weight | 44 kg |
| Dimensions (L x W x H) | 375 x 353 x 470 mm, excluding air filter assembly |
| Air path special feature | Altitude oxygen compensation intake port |
| Configuration | 9-in-1: airend + oil-gas separator tank + 3 filters + 4 valves |
The unit is supplied as the 9-in-1 integrated architecture with the plateau intake; the external air filter stays optional, a conventional airend architecture is available for other package designs, and 24 V or 540 V motor options serve electric-drive air systems. An aluminium-alloy housing is under development and a high-pressure variant up to 30 bar is under evaluation, not yet released.
Plateau intake9-in-1 integratedCE certificateConventional architecture
High-grade cast iron carries the housing load. Forged alloy steel rotors, ground to the German-designed UV patented profile over 20+ machining steps at micron-level accuracy, run in SKF heavy-duty rolling bearings behind a triple-sealing shaft seal. A built-in coarse separator in the tank plus an oversized external fine separator hold carry-over at the low level the oxygen and nitrogen generators require.
Plateau projects can specify the intake arrangement, the temperature envelope and the mounting interface, with technical drawings issued for package integration. Joint development is available where the oxygen or nitrogen chain imposes its own pressure, dryness or control requirements.
A plateau locomotive and coach oxygen supply project has run approximately 300 units over two years, delivering clean water-free compressed air for onboard oxygen and nitrogen generation, with normal operation at altitudes up to 5,000 m and stable pressure and delivery. In the parallel retrofit programme of about 300 units for aftermarket replacement and vehicle air system retrofit, supply was CE-compliant, purchase cost ran 25-30% below comparable European airends of equivalent performance, dimensions were drop-in, and lead time was 4-5 weeks against 8-10 weeks for imports.
In the plateau oxygen supply project the units have operated normally at altitudes up to 5,000 m with stable pressure and delivery.
3 ppm or lower, which is the ceiling set by the onboard oxygen and nitrogen generation duty.
-40 °C to +50 °C, covering the large day-night difference of plateau operation.
Yes. The retrofit programme used drop-in replacement dimensions, with CE-compliant supply at 25-30% lower purchase cost than comparable European airends and a documented 4-5 week lead time instead of 8-10 weeks.
No. The oxygen and nitrogen chain still uses an air dryer and precision filter; the airend delivers low carry-over, water-free after drying, compressed air into that chain.
CE certificate CE-WSD-GCU-2023-001 from TUV Rheinland, under MD 2006/42/EC, EN 1012-1, EN 60204-1 and EN ISO 1217, with ISO 9001:2015 and IATF 16949 as system certifications.
Overseas sales team: service@woyo.cn | Tel +86 510 8599 6655 | WhatsApp +86 189 1237 9878
Wuxi Woyo Superdo Compressor Co., Ltd., No.5 Changkang Road, Mashan, Binhu District, Wuxi, Jiangsu, China
Tell us your service altitude, ambient temperature range and required air dryness so we can confirm the plateau intake and separator configuration.
SEO Title: High-Altitude Integrated Screw Airend for Onboard Oxygen Supply
Meta Description: High-altitude GCU13 screw airend with oxygen compensation intake port, -40 to +50 °C design, under 3 ppm oil carry-over, for onboard O2 and N2 generation.
URL Slug: gcu13-high-altitude-screw-airend-oxygen-supply
H1: High-Altitude Integrated Screw Airend for Onboard Oxygen Supply
Primary terms: high-altitude screw airend, integrated screw compressor airend, onboard oxygen supply compressor