{{ variable.name }}
Plateau configuration of the GCU30 airend with altitude oxygen compensation intake port, feeding on-board oxygen and nitrogen generators with dry, water-free compressed air.

GCU30 plateau configuration — altitude compensation intake port, 96 kg integrated assembly
This version of the GCU30 is configured for on-board oxygen and nitrogen generation on locomotives and coaches operating at altitudes up to 5,000 m. It keeps the standard 18-22 kW drive, 2.5-3.3 m³/min at 7 bar and 5-12.5 bar working range, and adds an altitude oxygen compensation intake port together with a design qualified for -40 °C to +50 °C ambient. Oil carry-over is held at ≤3 ppm so the air reaching the generator is dry, and the 9-in-1 assembly keeps the complete air supply inside the underframe envelope.
| Model | GCU30, plateau configuration |
|---|---|
| Application altitude | Up to 5,000 m |
| Ambient design range | -40 °C to +50 °C |
| Altitude feature | Altitude oxygen compensation intake port |
| Drive power | 18-22 kW |
| Speed | 2,900-6,000 rpm |
| Free air delivery | 2.5-3.3 m³/min at 7 bar |
| Working pressure | Max. 12.5 bar / min. 5 bar |
| Oil carry-over | ≤3 ppm |
| 105 °C | |
| Noise level | ≤75 dB(A) |
| Net weight | 96 kg |
| Dimensions (L×W×H) | 560 × 490 × 580 mm, excluding air filter assembly |
| Housing | High-grade cast iron |
| Rotors | Forged alloy steel, German-designed UV patented profile |
| Bearings and seal | SKF heavy-duty rolling bearings; triple-sealing technology |
| Oil separation | Built-in coarse separator plus oversized external fine separator |
Two supply configurations exist for this platform: the standard 9-in-1 airend and the plateau configuration described here, which adds the compensation intake port and the low-temperature design. The air filter is optional. Downstream the airend is specified to feed an oxygen or nitrogen generator, an air dryer and a precision filter; these are matched components of the vehicle system rather than part of the airend itself.

Sealed integrated structure: airend, separator tank, filter positions and four valves
High-grade cast iron housing, forged alloy steel rotors with the German-designed UV patented profile, SKF heavy-duty rolling bearings and a triple shaft seal. The oil-gas separator tank carries a built-in coarse separator, with an oversized external fine separator completing the separation path. Intake control, minimum pressure, thermostat and safety valves are integrated on the same assembly.
Plateau locomotive and coach oxygen enrichment systems, on-board oxygen and nitrogen generation, and rail transit air supply where altitude and low temperature define the duty. The same configuration is used on mining equipment working above 4,000 m.
Compensation port placement, pressure setting, filter fitment and mounting interface are agreed per project, with technical drawings issued for fit checks. A drop-in replacement dimension is available for vehicles currently running imported airends.
On a plateau locomotive and coach oxygen supply project, 300 units have run for two years delivering clean water-free compressed air for on-board oxygen and nitrogen generation, with normal operation at altitudes up to 5,000 m and stable pressure and delivery. The project contractor reports roughly 300 units shipped cumulatively for aftermarket replacement and vehicle air system retrofit, CE-compliant supply, a purchase cost 25-30% lower than comparable European airends of equivalent performance, and a 4-5 week lead time against 8-10 weeks for imports.
It supports intake mass flow at high altitude, where low air density would otherwise pull delivery down. It is part of the plateau configuration, not the standard version.
The referenced plateau project reports stable pressure and delivery at altitudes up to 5,000 m with this configuration. The base rating remains 5-12.5 bar and 2.5-3.3 m³/min at 7 bar.
No. The GCU30 is an oil-injected screw airend. In this configuration oil carry-over is limited to ≤3 ppm, and the vehicle system uses a dryer and precision filter ahead of the generator.
The plateau configuration is designed for -40 °C to +50 °C ambient, which covers night and day extremes on high-altitude routes.
CE to MD 2006/42/EC, EN 1012-1, EN 60204-1 and EN ISO 1217 (TÜV Rheinland), ISO 9001:2015, plus rail transit product certification covering locomotive, EMU, metro and freight air supply units.
The contractor on the referenced project reports 4-5 weeks against 8-10 weeks for imported airends. Confirm the current lead time with the sales team when the configuration is fixed.
Tell us the operating altitude, ambient range, generator feed pressure and annual volume, and the configuration and drawings will be confirmed.
Email: service@woyo.cn | Tel: +86 510 8599 6655 | WhatsApp: +86 189 1237 9878
Wuxi Woyo Superdo Compressor Co., Ltd. (WOLXAIR), No.5 Changkang Road, Mashan, Binhu District, Wuxi, Jiangsu, China