{{ variable.name }}
For battery-powered buses and trucks the GCU13 is offered with 24 V or 540 V motor options and on-demand start-stop control. The electric-bus programme reports a 35% volume reduction and a sound level of 75 dB(A) or lower.
This configuration of the GCU13 serves braking, door actuation and air suspension on electric buses, electric heavy trucks and electric mining trucks, where every litre of compressed air is charged against the battery budget. On-demand intermittent start-stop control matches supply to demand instead of running continuously, and the compact envelope frees space that battery packs and thermal hardware need.
Core ratings are unchanged: 0.9-1.6 m³/min at 7 bar, 5-12.5 bar working pressure, 7-15 kW at 2900-6500 rpm, 44 kg and 375 x 353 x 470 mm excluding the air filter, with oil carry-over under 2 ppm and 105 °C maximum discharge temperature.
Intermittent operation driven by the vehicle air demand and energy-saving control cuts idle running on battery power.
The electric-bus programme reports a 35% smaller envelope than the layout it replaced, easing chassis packaging.
75 dB(A) or lower sound level suits late-night depot operation and passenger-adjacent installations.
Two motor options match low-voltage auxiliary and high-voltage traction-derived supplies.
Airend, separator tank, three filter positions and four valves in one unit reduce piping and weight on the chassis.
Oil carry-over under 2 ppm keeps valves, door actuators and air springs free of oil build-up.
| Model | GCU13 electric-vehicle configuration |
|---|---|
| Motor options | 24 V / 540 V |
| Free air delivery at 7 bar | 0.9-1.6 m³/min |
| Working pressure, max / min | 12.5 / 5 bar |
| Drive power and speed | 7-15 kW, 2900-6500 rpm |
| Noise | 75 dB(A) or lower |
| Volume reduction reported | 35% |
| Oil carry-over | Under 2 ppm (design limit 3 ppm) |
| Max discharge temperature | 105 °C |
| Net weight | 44 kg |
| Dimensions (L x W x H) | 375 x 353 x 470 mm, excluding air filter assembly |
| Configuration | 9-in-1: airend + oil-gas separator tank + 3 filters + 4 valves |
The electric-vehicle build is supplied as the 9-in-1 integrated unit; the conventional airend architecture remains available from the same source. Motor voltage is selected between 24 V and 540 V, the external air filter stays optional, and an aluminium-alloy housing is under development for further weight reduction. A high-pressure variant up to 30 bar is under evaluation for fuel-cell air supply and other forward-looking programmes, and is not yet released.
540 V motor24 V motorStart-stop control9-in-1 integrated
The housing is high-grade cast iron, with an aluminium-alloy housing under development. Forged alloy steel rotors use the German-designed UV patented profile, machined through 20+ steps to micron-level accuracy, carried on SKF heavy-duty rolling bearings with triple shaft sealing. Because the separator tank, filters and valves are integrated rather than bracketed separately, the assembly also removes external hoses that would otherwise run through a crowded electric chassis.
Voltage selection, mounting interface and control strategy are specified per vehicle platform, with technical drawings issued to the OEM. Standardised interfaces keep batch quality consistent when the same airend is fitted across several bus or truck models.
A new energy vehicle OEM in the electric-bus class has taken roughly 1,500 units per year over three years for braking, door actuation and air suspension. The programme result is a lightweight, low-energy air supply that meets the strict energy budget of electric buses, supported by the reported 35% volume reduction, 75 dB(A) or lower noise and the 540 V motor option.
24 V and 540 V motor options are offered for electric-drive air systems; the choice follows the vehicle auxiliary or traction-derived supply.
75 dB(A) or lower, which is the level reported in the electric-bus programme.
On-demand intermittent start-stop operation matches air supply to demand instead of running continuously, which is why the unit is used on vehicles with a strict battery budget.
The electric-bus programme reports a 35% volume reduction, and the unit itself measures 375 x 353 x 470 mm at 44 kg excluding the air filter.
Oil carry-over is under 2 ppm in operation with a 3 ppm design limit, using the built-in coarse separator and oversized external fine separator.
IATF 16949:2016 for automotive-grade quality management, ISO 9001:2015 certified by SGS, and CE certificate CE-WSD-GCU-2023-001 from TUV Rheinland.
Overseas sales team: service@woyo.cn | Tel +86 510 8599 6655 | WhatsApp +86 189 1237 9878
Wuxi Woyo Superdo Compressor Co., Ltd., No.5 Changkang Road, Mashan, Binhu District, Wuxi, Jiangsu, China
Share your platform voltage, air demand per cycle and available chassis space to receive the matching electric-vehicle configuration and drawings.
SEO Title: Compact Low-Noise Screw Compressor Airend for 540 V Electric Buses
Meta Description: GCU13 screw airend for 540 V electric buses: 35% smaller envelope, 75 dB(A) or lower, on-demand start-stop, under 2 ppm oil carry-over for brake and door air.
URL Slug: gcu13-540v-screw-airend-electric-bus
H1: Compact Low-Noise Screw Compressor Airend for 540 V Electric Buses
Primary terms: electric bus screw airend, 540 V air compressor, integrated screw compressor airend, new energy commercial vehicle air supply